Get Pass4sure 310-012 Free VCE and begin prepare today | braindumps | Great Dumps Real exam q&a of 310-012 test that you need to pass 310-012 exam are provided here with practice questions - VCE and examcollection - braindumps - Great Dumps

Pass4sure 310-012 dumps | 310-012 true questions |

310-012 Solaris 8 System Administration II

Study sheperd Prepared by SUN Dumps Experts 310-012 Dumps and true Questions

100% true Questions - Exam Pass Guarantee with tall Marks - Just Memorize the Answers

310-012 exam Dumps Source : Solaris 8 System Administration II

Test Code : 310-012
Test cognomen : Solaris 8 System Administration II
Vendor cognomen : SUN
braindumps : 325 true Questions

discovered an remedy source for true 310-012 concurrent dumps.
started out getting ready for the difficult 310-012 exam the use of the heavy and voluminous study books. but failed tocrack the tough topics and got panicked. i was about to drop the exam whilst any individual stated me the dumpwith the aid of killexams. It was virtually smooth to study and the fact that I may want to memorize utter in a brief time, removed utter my apprehensions. ought to crack 67 questions in only 76 mins and got a gargantuan eighty five marks. Felt indebted to for making my day.

simply those 310-012 modern day dumps and examine manual is required to pass the Take a gape at.
The Questions & solutions made me efficient enough to fracture up this exam. I endeavored 90/ninety five questions in due time and passed effectively. I never considered passing. a lot obliged for back me in passing the 310-012. With a complete time travail and an unquestionable diploma preparation aspect by pass of side made me greatly occupied to equip myself for the 310-012 exam. by one mode or every other I came to reflect onconsideration on killexams.

need true exam questions of 310-012 exam? download here.
My exam preparation happened into 44 birthright replies of the combination 50 inside the planned 75 mins. It labored simplytruly the tremendous. I were given an appealing revel in counting on the dumps for the exam 310-012. The aide clarified with compact answers and affordable instances.

worried for 310-012 exam? salvage this 310-012 query bank.
With only two weeks to travel for my 310-012 exam, I felt so helpless considering my indigent preparation. But, needed to pass the test badly as I wanted to change my job. Finally, I create the question and reply by which removed my worries. The content of the sheperd was flush and unique. The simple and short answers helped gain out the topics easily. mighty guide, killexams. besides took back from 310-012 Official Cert sheperd and it helped.

Prepare 310-012 Questions and Answers otherwise be prepared to fail. questions and answers was absolutely suitable. I cleared my 310-012 exam with sixty eight.25% marks. The questions were sincerely good. They preserve updating the database with unusual questions. And men, cross for it - they by no means disappoint you. thanks so much for this.

Do you want state-of-the-art dumps of 310-012 exam to limpid the examination?
I actually own recommended approximately your gadgets to various companions and partners, and theyre utter extremely fulfilled. Much obliged Questions & Answers for enhancing up my profession and assisting me map nicely for my stern checks. Much liked another time. I ought to mutter that I am your greatest fan! I want you to recognize that I cleared my 310-012 exam these days, contemplating the 310-012 direction notes I purchased from you. I solved 86/95 questions in the exam. You are the best training issuer.

i discovered a terrific location for 310-012 question pecuniary institution.
At closing, my marks 90% turned into more than choice. on the point when the exam 310-012 turned into handiest 1 week away, my planning changed into in an indiscriminate situation. I expected that i would want to retake inside the occasion of unhappiness to salvage eighty% marks. Taking after a partners advice, i bought the braindumps from and will Take a mild arrangement through typically composed material.

need to-the-factor expertise modern day 310-012 subjects!
Failure to palter in those acceptation that it was those very moments that they couldnt learn to forget but now they utter know that whether or not there was some intuition to the Little thing that they couldnt not observe just yet those stuff that they werent conjectural to know so now you must know that I cleared my 310-012 test and it was better than anything and yes I did with and it wasnt such a nasty thing at utter to study online for a change and not sulk at home with my books.

got no trouble! three days education latest 310-012 dumps is needed.
I own been so susceptible my entire pass yet I know now that I had to salvage a skip in my 310-012 and this can gain me well-liked probable and yes I am quick of radiance but passing my exams and solved nearly utter questions in just 75 minutes with dumps. A yoke of splendid guys cant bring a alternate to planets manner but they can just permit you to recognize whether or not youve got been the principle fellow who knew a pass to try this and I want to be acknowledged on this global and gain my personal precise imprint.

Do the quickest manner to skip 310-012 exam? i own got it.
Its concise solutions helped me to accomplish top marks noting utter questions below the stipulated time in 310-012. Being an IT master, my competencies with respect are so forth need to be precise. now not withstanding, proceeding with a criterion employment with giant obligations, it changed into no longer easy for me to Take a stable making plans. At that point, i discovered out approximately the usually organized question and solution aide of dumps.

SUN Solaris 8 System Administration

Solaris 8 consumer Administration tools | true Questions and Pass4sure dumps

Peter Gregory discusses user account configuration data; including, editing, and deleting person debts with Admintool and shell commands; user shells; and user account instructions in Solaris eight.

This pattern chapter is excerpted from solar licensed system Administrator for Solaris eight examine ebook, by pass of Peter Gregory.

This chapter is from the ebook 

After finishing this chapter, you will be able to

  • determine here login procedures: log birthright into a equipment, log off of a device, and change login passwords.

  • State the command used to identify which users are at present logged into the gadget.

  • State the steps required to create consumer bills on the autochthonous gadget the usage of the admintool utility.

  • State the command syntax so as to add, modify, or delete consumer/neighborhood accounts on the autochthonous tackle with the useradd, groupadd, usermod, groupmod, userdel, or groupdel commands.

  • Given a user's login shell, list the shell initialization info used to deploy a user's travail environment at login.

  • to meet these targets, this chapter discusses:

  • consumer account configuration data;

  • including, modifying, and deleting user bills with Admintool;

  • including, enhancing, and deleting user accounts with shell commands;

  • person shells; and

  • user account commands.

  • Three primary information define the id of a consumer account: the password file, the shadow file, and the community file.

    The Password File

    The password file contains the primary making a selection on suggestions for each and every consumer allowed to entry a system. The gadget vicinity of the password file is /and many others/passwd. The format of the password file is:


    These fields are:

  • username—the identify that identifies the consumer account.

  • password—in Solaris eight an "x" in this box signifies that the corresponding shadow file includes the encrypted password string.

  • uid—the spirited numerical identity assigned to the account. The optimum expense for UID is 2147483647, but directors are urged to use values below 60,000 to be inevitable compatibility with the entire tools that are used to manage money owed or panoply tips that includes usernames.

  • gid—the basic (default) numerical neighborhood identification assigned to the account. dote the UID field, the highest cost for GID is 2147483647, but a maximum of 60,000 is preferable.

  • gcos-field—here's the person's true identify (the time term "gcos-box" is the historical term for this container).

  • domestic-dir—the directory where the user is placed after logging in; this constantly includes the user's own files and directories.

  • login-shell—the prefatory shell it really is started on behalf of the user upon logging in. If this box is blank, then /usr/bin/sh is used.

  • The password file can be examine by anyone on the equipment. There isn't any information that own to be stored surreptitious in this file. A sample password file feels dote this:

    root:x:0:1:super-user:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:three:three::/: adm:x:four:4:Admin:/var/adm: lp:x:seventy one:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico listen:x:37:four:community Admin:/usr/internet/nls: pete:x:a hundred:4:Peter Gregory:/export/home/pete:/bin/sh no one:x:60001:60001:no one:/:

    Fields within the password file are delimited with the aid of colons (":"), and antiseptic fields are signified through two adjoining colons ("::"). as an example, be sensible that the account identify container for daemon is clean—simply two colons. additionally, daemon has no shell entry, so the ultimate character for daemon is the colon delimiter.

    The colon delimiter is additionally used within the shadow and community info, that are mentioned in a later area.

    it is viable and permissible to create a yoke of username within the password file with the equal UID. every username may own its personal wonderful password. despite the fact, tools comparable to ls and ps, when used with alternatives exhibiting username, will monitor the first username create in the password file matching the UID.

    When a unusual account is brought, changed, or eliminated with the useradd, usermod, or userdel instructions (that are discussed later in this chapter), the gadget creates a backup copy of the password file, called /etc/opasswd.

    The Shadow File

    The shadow file carries every consumer account's encrypted password, as well as specific per-account parameters governing "password aging." The gadget location of the shadow file is /etc/shadow. The format of the shadow file is:


    These fields are:

  • username—here is the equal username present in the password file.

  • password—a 13-character encrypted password. If this box consists of a lock string (e.g., "locked" or "NP"), the account is inaccessible; if blank, the account has no password.

  • lastchg—date of closing password trade (actually the variety of days between January 1, 1970, and the date the password become terminal modified).

  • min—minimum variety of days allowed earlier than the password may besides be modified.

  • max—optimum number of days allowed before the password expires.

  • warn—the number of days earlier than expiration that the consumer is warned.

  • inactive—the variety of days of condition of being idle allowed for the account before the account is immediately locked.

  • expire—the date when the user account is deactivated.

  • flag—a container reserved for future use.

  • The shadow file is restricted so that most efficient the tackle administrator can study it. here's because an interloper could role a "dictionary assault," the usage of guessable passwords in an try to assess the passwords for one or extra money owed. classes that "crack" account passwords are available for this goal; as a result, the shadow file isn't publicly readable.

    A pattern shadow file feels dote this:

    root:Pe0iQfp2LcAig:10528:::::: daemon:NP:6445:::::: bin:NP:6445:::::: sys:NP:6445:::::: adm:nIP3GPx2FIZYQ:11053:::::: lp:NP:6445:::::: uucp:NP:6445:::::: nuucp:NP:6445:::::: hear:*LK*::::::: pete:GSSUYVrJ8EKyA:11055:::::: nobody:NP:6445::::::

    note that one of the crucial money owed within the instance shadow file own "NP" ("no password") or "*LK*" (locked) in them. These are only two approaches of signifying that the bills are locked towards login. there's nothing truly magic about "NP" or "*LK*"—they are just one pass of effectively displaying that these accounts are locked and going to abide that way. You could build other text within the password box to suit your wants; for instance, a helpdesk ticket quantity or a date.

    When a consumer adjustments his or her password, the gadget creates a backup reproduction of the shadow file, referred to as /etc/oshadow. This additionally happens if root adjustments a consumer's password.

    exam Notes

    feel About It . . .

    Why are encrypted passwords present in /etc/shadow and never in /and many others/passwd?

    for many commands (ps, ls, and so forth.) to travail properly, /etc/passwd should be world readable. ahead of using /etc/shadow, utter clients' encrypted password strings were additionally publicly readable. This gave americans with "password cracking" courses a casual to determine different users' passwords. by relocating the encrypted password strings to /and so on/shadow (which may besides be study simplest with the aid of root), the means to entry encrypted passwords is eradicated.

    First, a Little bit of background. Older versions of UNIX did not own a shadow file; instead, the encrypted password string become present in the password file, within the 2d box it really is usually stuffed with an "x" in Solaris. Solaris noiseless supports the encrypted password acting in the password file, although this is no longer really useful, for the intuition that the password file is publicly readable.

    Older versions of UNIX with out a shadow file additionally had no password-getting dilapidated capability.

    The network tips system (NIS) subsystem turned into designed around the dilapidated shadow-much less architecture; this explains why NIS has no shadow map, nor does it sheperd password ageing.

    The neighborhood File

    The group file carries a listing of the entire groups on the device, together with each and every group's numeric groupid and an inventory of each of the usernames which are secondary members of each and every community. The region of the group file is /and so on/community. The layout of the neighborhood file is:


    These fields are:

  • groupname—this is the cognomen of the neighborhood.

  • password—this is an not obligatory password for the community.

  • gid—the spirited numerical identity assigned to the community. The optimum value for GID is 2147483647, but administrators are advised to gain use of values less than 60,000 to gain inevitable compatibility with utter of the tools which are used to control money owed or expose tips that comprises neighborhood names.

  • user-list—a comma-separated record of users allowed in the group. These businesses are clients' secondary community IDs.

  • A pattern group file follows.

    root::0:root other::1: bin::2:root,bin,daemon sys::three:root,bin,sys,adm adm::four:root,adm,daemon uucp::5:root,uucp mail::6:root tty::7:root,tty,adm lp::eight:root,lp,adm nuucp::9:root,nuucp team of workers:GSSUYVrJ8EKyA:10:pete daemon::12:root,daemon sysadmin::14: no one::60001: noaccess::60002: nogroup::65534:

    be sensible the password sphere in the community "team of workers." groups can be password included through inserting a password string into the password box. observe, though, that this is a very sheperd manner; there are no tackle supplied to region the group password in for you.

    trace: that you may Take a password string from the shadow file and use the vi editor to splice it into the community file. The group password will be the equal as the account password from the shadow entry the region you took the password string.

    When a group is password protected, any one who is not a member of the neighborhood could be challenged for the neighborhood's password when they've entered the newgrp command.

    simple and Secondary Groupids

    each and every consumer account has one fundamental groupid—here is the community defined in the password file. When a person logs on, here is his or her associated groupid.

    each and every consumer account besides has zero or more secondary groupids. A person's secondary corporations are those community entries that comprise the username of their lists of contributors.

    There are some efficient obstacles of groupids. as an instance, each user account may besides be in no greater than sixteen organizations, and a line in the neighborhood file can't exceed 512 characters (together with the newline persona).

    What happens if you should add so many individuals to a gaggle that you just exceed the 512-personality entry limit? You simply create a different replica community entry—identical identify and community quantity—and list the extra individuals there.

    The primary and secondary groupids at once impress file gadget entry permissions, which is explored thoroughly in Chapter 10.

    examination Notes

    consider About It . . .

    What often is the sequel if a username own been brought to a gaggle file entry when that group was the consumer's primary neighborhood?

    The additional entry would own no impact, considering the person is already configured for the fundamental neighborhood membership in the /and so on/passwd file.

    the root Account

    the foundation account has particular privileges on a equipment: Root is permitted to study and write every file on a system, in spite of the file's ownership and authorization settings. system directors log in with the root account that allows you to operate administrative initiatives.

    the root account gets its power and privilege from the cost of its user number: Root is person quantity zero, described in the password file.

    examination Notes

    think About It . . .

    What could be the consequences of changing a typical consumer's person quantity to zero? What potential could there be of inserting root's entry at the conclusion of the passwd file (in its region of the starting)?

    altering a regular person's consumer number to zero gives the consumer root privileges.

    One skills of inserting root on the conclusion of the password file is that if an interloper is in a position to adjust the password file to give another user root privilege (see the first question here), then output from commands equivalent to ls and ps would exhibit that different person because the owner of root strategies and data.

    Buhari swears in 8 perm secs with can impregnate to limpid up system’s rot | true Questions and Pass4sure dumps

    Juliana Taiwo-Obalonye, Abuja

    President Muhammadu Buhari on Wednesday stated, past administrations abused the federal civil service and undermined provider nascence to the individuals.

    He cited this at the swearing in of eight everlasting secretaries from eight states the region vacancies existed.

    in response to him, past administrations “abused, undermined and destroyed the device of exams and balances inside the civil service that turned into intended to give protection to and maintain the activity of their residents.”

    The president delivered that it turned into this systemic mistreat of energy that “significantly enriched just a few privileged individuals while on the identical time making the vast majority of their fellow citizens poorer and underserved.

    “in consequence, many Nigerians misplaced self credit in the govt and its means to carry the required information and service to their individuals.”

    President Buhari reiterated that his administration had considering he came into office in can besides 2015, delivered on its three cardinal programmes: protection, inclusive and diverse economic pile and battle towards corruption and mistreat of vigour.

    He expressed delight that in under 4 years, “we've made growth on utter fronts working very collaboratively with the civil carrier.”

    Buhari charged the unusual appointees to key “into the administration’s programmes aimed at reforming Nigeria and restoring the self assurance of Nigerians in executive and the civil provider.

    “To enable you to achieve this, they approved the Federal Civil provider strategy and Implementation map 2017 to 2020. This map will gain certain that the civil provider is sufficiently manned and fitted to role successfully because it implements govt policies for inclusive boom and development.

    “When thoroughly carried out, they would own efficaciously transformed the civil service into an efficient, productive, incorruptible and citizen-centreded machinery of govt.

    “therefore, l wish to Take this casual to solicit your assist and cooperation as they invoke utter of the programmes of executive in a influence-oriented mode on the pass to travel away an indelible legacy.

    “In doing this, you need to utter remain above board and eschew partisanship your selections and actions. You ought to strive to achieve excellence continually. Your motto may noiseless be civility and serviceability.”

    President Buhari inevitable the entire civil provider and the broader public provider of the commitment of his administration to its welfare and skill construction consistently.

    He congratulated the newly-sworn in everlasting secretaries, announcing “here's an outstanding fulfillment for which you should be proud. best a tiny percent of Nigerians gain it to this stage. i'm certain that your journey to attain this apex position within the federal civil provider has been complete of challenges and sacrifices.

    “nowadays you and your households will own a generous time the reward of the a long time of provider that you've build in.

    “As you own fun this miraculous achievement, I additionally are looking to remind you that the oath you simply took and the position you currently dangle arrive with loads of duties.

    “Now more than ever earlier than, their nation needs a extremely vibrant, skilled and selfless civil service in an effort to uphold their country overcome its urgent problems.

    “As politicians, they enlarge policies and provide strategic course for the nation. despite the fact, the assignment of imposing these guidelines and methods rests within the arms of the civil carrier beneath the ready advice of the permanent secretaries.”

    The everlasting secretaries had been sworn in presently earlier than the graduation of the Federal govt Council (FEC) meeting.

    here's the 2d FEC meeting for the intuition that the yr started to be presided over by pass of President Buhari, the primary assembly held on January 9, where the institution of four unusual deepest universities became accredited.

    The permanent secretaries took their oaths of office in two batches.

    the unusual permanent secretaries are Abel, Olumuyiwa Enitan (Osun State), Dr. Mohammed Dikwa (Borno), Dr. Ajani Magdalene N. Olor (Delta) and Festus Yusuf Narai Daudu (Nasarawa). Others are Mbaeri, Maurice Nnamdi (Imo), Dr. Bakari Wadinga (Adamawa), Babatunde Lawal (Lagos), and Umakhihe Ernest Afolabi (Edo).

    sun certified Solaris Administrator: Job data & requirements | true Questions and Pass4sure dumps

    licensed Solaris administrators are specialized techniques administrators that preserve laptop programs and networks in keeping with Solaris expertise. massive organizations, non-earnings organizations and governmental businesses, among others, are ordinary employers of certified Solaris administrators. day-to-day responsibilities comprise presenting operational guide, conducting preventative upkeep, performing server optimization and making scheduled server backups.

    schooling Bachelor's degree in community or methods administration always required Job competencies communique, vicissitude fixing, evaluation, travail experienceMedian earnings (2016)* $eighty two,548 for sun Solaris tackle directors Job growth (2014-2024)** eight% for community and computer programs directors

    supply: *Payscale, **U.S. Bureau of Labor information

    Required education

    certified Solaris directors continually own a bachelor's degree in community or programs administration. Core coursework usually covers issues in networking infrastructure, protocols and safety. students additionally learn the pass to travail with UNIX server and windows working programs. Prior journey as a community technician or uphold desk worker can be primarily helpful. Certification courses and materials can be create during the Oracle business enterprise or permitted practicing centers; candidates salvage hold of their credentials after passing an examination.

    talents Required

    systems directors in common may noiseless own stalwart analytical, communication and problem-solving competencies. a radical figuring out of the underlying technologies and ideas of Solaris working programs and know-how is elementary, as smartly as the capacity to deal with multiplie projects and responsibilities.

    Employment and salary Outlook

    The U.S. Bureau of Labor statistics (BLS) stated that employment of network and computer methods directors, including certified Solaris administrators, will develop with the aid of an middling cost of eight% nationwide between 2014 to 2024. according to the BLS, the median annual salary for network and laptop techniques administrators became $seventy seven,810 in may besides 2015. in line with statistics from, the median income for a sun Solaris techniques administrator changed into $82,548 in January 2016.

    While it is very difficult assignment to pick reliable certification questions / answers resources with respect to review, reputation and validity because people salvage ripoff due to choosing wrong service. gain it certain to serve its clients best to its resources with respect to exam dumps update and validity. Most of other's ripoff report complaint clients arrive to us for the brain dumps and pass their exams happily and easily. They never compromise on their review, reputation and attribute because killexams review, killexams reputation and killexams client aplomb is vital to us. Specially they Take supervision of review, reputation, ripoff report complaint, trust, validity, report and scam. If you observe any unsuitable report posted by their competitors with the cognomen killexams ripoff report complaint internet, ripoff report, scam, complaint or something dote this, just preserve in intuition that there are always nasty people damaging reputation of generous services due to their benefits. There are thousands of satisfied customers that pass their exams using brain dumps, killexams PDF questions, killexams practice questions, killexams exam simulator. Visit, their sample questions and sample brain dumps, their exam simulator and you will definitely know that is the best brain dumps site.

    Back to Braindumps Menu

    ISEE brain dumps | FM0-301 questions answers | 00M-241 practice test | 1Z1-456 cheat sheets | 310-091 sample test | 000-744 test prep | MSC-241 test prep | 090-078 exam prep | 4A0-109 mock exam | 310-092 brain dumps | HP2-E15 practice exam | 000-123 questions and answers | 150-230 study guide | 190-735 practice questions | 9A0-351 bootcamp | DSDPS-200 exam prep | F50-533 study guide | CFEX cram | 000-202 VCE | UM0-200 study guide |

    Look at these 310-012 true question and answers is a definitive arrangement hotspot for passing the SUN 310-012 exam. They own painstakingly agreed and gathered true exam questions, which are refreshed with indistinguishable recurrence from true exam is refreshed, and checked on by industry specialists. Colossal Discount Coupon and Promo codes are offered for awesome discount.

    The attribute pass to salvage success in the SUN 310-012 exam is which you should salvage dependable braindumps. They guarantee that is the most direct pathway towards SUN Solaris 8 System Administration II exam. You may be efficient with complete fact. You can observe lax questions at earlier than you purchase the 310-012 exam objects. Their brain dumps are in one of a benign selection the very as the actual exam design. The questions and answers made via the certified professionals. They arrive up with the revel in of taking the actual exam. A hundred% guarantee to pass the 310-012 true exam. Huge Discount Coupons and Promo Codes are as beneath;
    WC2017 : 60% Discount Coupon for utter exams on internet site
    PROF17 : 10% Discount Coupon for Orders greater than $69
    DEAL17 : 15% Discount Coupon for Orders greater than $ninety nine
    DECSPECIAL : 10% Special Discount Coupon for utter Orders

    Quality and Value for the 310-012 Exam: practice Exams for SUN 310-012 are composed to the unostentatious best necessities of specialized precision, utilizing just guaranteed issue tally experts and distributed creators for improvement.

    100% Guarantee to Pass Your 310-012 Exam: If you don't pass the SUN 310-012 exam the utilization of their experimenting with engine, they will give you a complete REFUND of your purchasing charge.

    Downloadable, Interactive 310-012 Testing engines: Their SUN 310-012 Preparation Material presents you utter that you will need to Take SUN 310-012 exam. Points of interest are investigated and created by utilizing SUN Certification Experts who're continually the use of industry delight in to give extraordinary, and legitimate.

    - Comprehensive questions and answers about 310-012 exam - 310-012 exam questions joined by displays - Verified Answers by Experts and very nearly 100% right - 310-012 exam questions updated on universal premise - 310-012 exam planning is in various decision questions (MCQs). - Tested by different circumstances previously distributing - Try free 310-012 exam demo before you pick to salvage it in Huge Discount Coupons and Promo Codes are as under;
    WC2017: 60% Discount Coupon for utter exams on website
    PROF17: 10% Discount Coupon for Orders greater than $69
    DEAL17: 15% Discount Coupon for Orders greater than $99
    DECSPECIAL: 10% Special Discount Coupon for utter Orders


    310-012 Practice Test | 310-012 examcollection | 310-012 VCE | 310-012 study guide | 310-012 practice exam | 310-012 cram

    Killexams A00-202 practice test | Killexams 1Z0-346 bootcamp | Killexams 000-572 true questions | Killexams C5050-284 practice test | Killexams C4090-959 test prep | Killexams 9A0-803 braindumps | Killexams 000-484 true questions | Killexams HP0-553 free pdf download | Killexams C2170-011 exam prep | Killexams 9L0-409 braindumps | Killexams 650-367 dumps questions | Killexams 700-501 VCE | Killexams HP0-606 pdf download | Killexams 000-m240 study guide | Killexams P8060-028 questions and answers | Killexams 000-057 questions and answers | Killexams HP0-517 brain dumps | Killexams C2020-700 practice test | Killexams 70-638 dump | Killexams 200-601 test prep | huge List of Exam Braindumps

    View Complete list of Brain dumps

    Killexams HPE0-J77 practice test | Killexams HP2-Z08 practice questions | Killexams 000-815 free pdf | Killexams C90-01A cheat sheets | Killexams 190-840 study guide | Killexams NE-BC true questions | Killexams MSC-321 braindumps | Killexams 190-621 pdf download | Killexams 000-375 questions and answers | Killexams HPE2-T34 free pdf | Killexams HH0-230 test prep | Killexams 000-341 brain dumps | Killexams 1D0-441 cram | Killexams HP2-K36 free pdf | Killexams ACNP test prep | Killexams CAT-241 free pdf download | Killexams 7141X test questions | Killexams C2090-312 dump | Killexams 310-044 practice questions | Killexams HPE0-J79 questions and answers |

    Solaris 8 System Administration II

    Pass 4 certain 310-012 dumps | 310-012 true questions |

    Disk Slices | true questions and Pass4sure dumps

    This chapter is from the bespeak 

    Disks are divided into regions called “disk slices” or “disk partitions.” A slice is composed of a single ambit of contiguous blocks. It is a physical subset of the disk (except for slice 2, which represents the entire disk). A UFS or the swap belt is built within these disk slices. The boundaries of a disk slice are defined when a disk is partitioned using the format utility, and the slice information for a particular disk can be viewed by using the prtvtoc command. Each disk slice appears to the OS (and to the system administrator) as though it were a divorce disk drive.

    Disk slicing differs between the SPARC and x86 platforms. On the SPARC platform, the entire disk is devoted to the OS; the disk can be divided into 8 slices, numbered 0 to 7. On the x86 platform, the disk is divided into fdisk partitions using the fdisk command. The fdisk partition is divided into 10 slices, numbered 0 to 9.

    A physical disk consists of a stack of circular platters. Data is stored on these platters in a cylindrical pattern called “cylinders” as illustrated in figure 4-1. Cylinders can be grouped and isolated from one another. A group of cylinders is referred to as a slice. A slice is defined with start and cessation points, starting from the outside of the platters to the hub of the stack of platters, which is called the “spindle.”

    For example, a 73GB SCSI disk has 14,087 cylinders, numbered 0 to 14,086. Cylinder 0 is on the outside edge of the platters, and cylinder 14,086 is the closest to the spindle. Disk slices are defined by an offset and a size in cylinders. The offset is the distance from cylinder 0. To define a slice, the administrator provides a starting cylinder and an ending cylinder. A slice spanning from cylinder 0 to 14,086 would use the entire disk and is typical of the slicing scheme used on a ZFS boot disk.

    When setting up slices, recall these rules:

  • Each disk slice holds only one file system.
  • No file system can span multiple slices without the use of a volume manager such as ZFS or SVM.
  • After a file system is created, its size cannot be increased or decreased without repartitioning and possibly destroying the partition directly before or after it.
  • Slices cannot span multiple disks; however, multiple swap slices on divorce disks are allowed.
  • When they dispute ZFS in Chapter 5, you’ll learn how to salvage around some of these limitations in file systems.

    Displaying Disk Configuration Information

    As described earlier, disk configuration information is stored in the disk label. If you know the disk and slice number, you can panoply information for a disk by using the print volume table of contents (prtvtoc) command. You can specify the volume by specifying any slice defined on the disk (for example, /dev/rdsk/c0t3d0s2 or /dev/rdsk/c0t3d0s*). Regardless of which slice you specify, utter slices defined on the disk will be displayed. If you know the target number of the disk but finish not know how it is divided into slices, you can note information for the entire disk by specifying either slice 2 or s*. The following steps note how you can examine information stored on a disk’s label by using the prtvtoc command.

  • Become the superuser.
  • Type the following text and press Enter.

    # prtvtoc /dev/rdsk/c2t0d0s2<cr>

    The system responds with the following:

    * /dev/rdsk/c2t0d0s2 partition map * * Dimensions: * 512 bytes/sector * 424 sectors/track * 24 tracks/cylinder * 10176 sectors/cylinder * 14089 cylinders * 14087 accessible cylinders * * Flags: * 1: unmountable * 10: read-only * * Unallocated space: * First Sector Last * Sector signify Sector * 0 10176 10175 * * First Sector Last * Partition Tag Flags Sector signify Sector Mount Directory 0 2 00 10176 143339136 143349311 2 5 01 0 143349312 143349311
  • The disk described is a SAS disk, target 0 with an SMI VTOC label. The prtvtoc command shows the number of cylinders and heads, as well as how the disk’s slices are arranged.

    The following is an instance of running the prtvtoc command on a SCSI disk with an EFI label:

    # prtvtoc /dev/rdsk/c2t1d0s1<cr> * /dev/rdsk/c2t1d0s1 partition map * * Dimensions: * 512 bytes/sector * 8385121 sectors * 8385054 accessible sectors * * Flags: * 1: unmountable * 10: read-only * * First Sector Last * Partition Tag Flags Sector signify Sector Mount Directory 0 2 01 34 41006 41039 1 2 00 41040 8327663 8368702 /mnt 8 11 00 8368703 16384 8385086 Using the format Utility to Create Slices: SPARC

    Before you can create a file system on a disk, the disk must be formatted, and you must divide it into slices using the format utility. Formatting involves two divorce processes:

  • Writing format information to the disk
  • Completing a surface analysis, which compiles an up-to-date list of disk defects
  • When a disk is formatted, header and trailer information is superimposed on the disk. When the format utility runs a surface analysis, the controller scans the disk for defects. It should be notable that defects and formatting information reduce the total disk space available for data. This is why a unusual disk usually holds only 90% to 95% of its capacity after formatting. This percentage varies according to disk geometry and decreases as the disk ages and develops more defects.

    The need to perform a surface analysis on a disk drive has dropped as more manufacturers ship their disk drives formatted and partitioned. You should not need to perform a surface analysis within the format utility when adding a disk drive to an existing system unless you reflect disk defects are causing problems. The primary intuition that you would use format is if you want to view or change the partitioning scheme on a disk.

    The format utility searches your system for utter attached disk drives and reports the following information about the disk drives it finds:

  • Target location
  • Disk geometry
  • Whether the disk is formatted
  • Whether the disk has mounted partitions
  • In addition, the format utility is used in disk repair operations to finish the following:

  • Retrieve disk labels
  • Repair defective sectors
  • Format and resolve disks
  • Partition disks
  • Label disks (i.e., write the disk cognomen and configuration information to the disk for future retrieval)
  • The installation program partitions and labels disk drives as fraction of installing the Oracle Solaris release. However, you might need to use the format utility when doing the following:

  • Displaying slice information
  • Dividing a disk into slices
  • Formatting a disk drive when you reflect disk defects are causing problems
  • Repairing a disk drive
  • Changing a disk label from EFI to SMI or vice versa
  • The following instance uses the format utility to create disk slices on a disk.

  • Become the superuser
  • Type “code.”

    The system responds with the following:

    Searching for disks ... done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,0/pci@1/scsi@8/sd@0,0 1. c0t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,0/pci@1/scsi@8/sd@1,0
  • Specify the disk (enter its number).

    The system responds with the format main menu:

    FORMAT MENU: disk - select a disk nature - select (define) a disk type partition - select (define) a partition table current - characterize the current disk format - format and resolve the disk repair - repair a defective sector label - write label to the disk resolve - surface analysis defect - defect list management backup - search for backup labels verify - read and panoply labels save - save unusual disk/partition definitions research - note vendor, product and revision volname - set 8-character volume name !<cmd> - execute <cmd>, then return quit

    Table 4-4 describes the format main menu items.

    Table 4-4 Format Main Menu item Descriptions

    Menu Item



    Lists utter of the system’s drives. besides lets you pick the disk you want to use in subsequent operations. This disk is referred to as the current disk.


    Identifies the manufacturer and model of the current disk. besides displays a list of known drive types. pick the Auto configure option for utter SCSI-2 disk drives.


    Creates and modifies slices.


    Describes the current disk (that is, device name, device type, number of cylinders, alternate cylinders, heads, sectors, and physical device name).


    Formats the current disk using one of these sources of information in this order:

    Information that is create in the format.dat file.

    Information from the automatic configuration process.

    Information that you nature at the prompt if no format.dat entry exists.

    This command does not apply to IDE disks. IDE disks are preformatted by the manufacturer.


    x86 platform only: Runs the fdisk program to create an Oracle Solaris fdisk partition.


    Used to repair a specific shroud on the current disk.


    Writes a unusual label to the current disk. This is not the very as labeling the disk with volname.


    Runs read, write, and compare tests.


    Retrieves and displays defect lists. This feature does not apply to IDE disks. IDE disks manage defects automatically.


    Searches for backup labels if the VTOC becomes corrupted or gets deleted.


    Displays information about the current disk such as device name, device type, number of cylinders, alternate cylinders, heads, sectors, and partition table.


    Saves unusual disk and partition information.


    SCSI disks only: Displays the vendor, product name, and revision smooth of the current drive. This will besides panoply the disk’s current firmware.


    Labels the disk with a unusual eight-character volume cognomen that you specify. This is not the very as writing the partition table to disk using label.


    Exits the format menu. Pressing Ctrl+D will besides exit the format utility from the main menu or from any submenu.

  • Type “partition” at the format prompt. The partition menu is displayed.

    format> partition<cr> PARTITION MENU: 0 - change '0' partition 1 - change '1' partition 2 - change '2' partition 3 - change '3' partition 4 - change '4' partition 5 - change '5' partition 6 - change '6' partition 7 - change '7' partition select - select a predefined table modify - modify a predefined partition table cognomen - cognomen the current table print - panoply the current table label - write partition map and label to the disk !<cmd> - execute <cmd>, then return quit
  • Type “print” to panoply the current partition map.

    partition> print<cr>

    The system responds with the following:

    Current partition table (original): Total disk cylinders available: 24620 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 1418 - 9924 11.72GB (8507/0/0) 24576723 1 var wm 9925 - 13469 4.88GB (3545/0/0) 10241505 2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180 3 swap wu 0 - 1417 1.95GB (1418/0/0) 4096602 4 unassigned wm 13470 - 14887 1.95GB (1418/0/0) 4096602 5 unassigned wm 14888 - 16112 1.69GB (1225/0/0) 3539025 6 unassigned wm 16113 - 16821 1000.15MB (709/0/0) 2048301 7 home wm 16822 - 23910 9.77GB (7089/0/0) 20480121

    The columns displayed with the partition table are

  • Part: The slice number (0–7).
  • Tag: This is an optional value that indicates how the slice is being used. The value can be any of the following names that best fits the role of the file system you are creating:

    unassigned, boot, root, swap, usr, backup, stand, var, home, alternates, reserved, system, BIOS_boot

  • Flag: Values in this column can be

  • wm The disk slice is writable and mountable.
  • wu The disk slice is writable and unmountable (such as a swap slice).
  • rm The disk slice is read-only and mountable.
  • ru The disk slice is read-only and unmountable.
  • Cylinders: The starting and ending cylinder number for the disk slice.
  • Size: The slice size specified as

  • mb megabytes
  • gb gigabytes
  • b blocks
  • c cylinders
  • b Blocks
  • e Ending cylinder
  • You can use the cognomen and save commands in the partition menu to cognomen and save a newly created partition table to a file that can be referenced by cognomen later, when you want to use this very partition scheme on another disk. When issuing the cognomen command, you’ll provide a unique cognomen for this partition scheme and then issue the save command to save the information to the ./format.dat file. Normally this file is located in the /etc directory, so provide the complete pathname for /etc/format.dat to update the master file.

  • After you partition the disk, you must label it by typing label at the partition prompt:

    partition> label<cr>

    You are asked for confirmation on labeling the disk as follows:

    Ready to label disk, continue? y<cr>

    Enter “Y” to continue.

  • After labeling the disk, nature “quit” to exit the partition menu or press Ctrl+D to exit the format utility:

    partition> quit<cr>
  • Type “quit” again to exit the format utility:

    format> quit<cr>
  • It’s vital to point out a few undesirable things that can happen when defining disk partitions with the format utility if you’re not careful. First, be watchful not to squander disk space. Wasted disk space can occur when you subside the size of one slice and finish not adjust the starting cylinder number of the adjoining disk slice.

    Second, don’t overlap disk slices. Overlapping occurs when one or more cylinders are allocated to more than one disk slice. For example, increasing the size of one slice without decreasing the size of the adjoining slice will create overlapping partitions. The format utility will not caution you of wasted disk space or overlapping partitions.

    The main intuition a system administrator uses the format utility is to divide a disk into disk slices. In Oracle Solaris 11 11/11, for a bootable ZFS root pool, the disks in the pool must accommodate slices and must be labeled with an SMI label. The simplest configuration would be to build the entire disk capacity in slice 0 and use that slice for the root pool. Bootable ZFS root pools are discussed further in Chapter 5.

    I’ll characterize how to use the SMI label for SPARC-based systems. For example, on a SPARC-based system with a 72GB disk, you would need to own 68GB of usable space located in slice 0. Similarly, on an x86-based system with a 72GB disk, you would besides need to allow 68GB of usable space located in slice 0. A small amount of boot information is contained in slice 8. Slice 8 requires no administration and cannot be changed.

    Follow these steps to partition a disk (c2t0d0) to be used as a ZFS boot disk (bootable ZFS root pool) on a SPARC-based system. If the disk has an EFI label, and the firmware has not been upgraded, you must first metamorphose it to an SMI label.

    Use the prtvtoc command to verify the disk label as follows:

    # prtvtoc /dev/rdsk/c2t0d0s2<cr>

    The system displays

    Part Tag Flag Cylinders Size Blocks 0 root wm 1 - 14086 68.35GB (14086/0/0) 143339136 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0

    Notice that slice 2 is labeled “backup” and the slices are numbered 0-7. This is an SMI label.

    The following shows the output that is displayed for a disk with an EFI label:

    Part Tag Flag First Sector Size terminal Sector 0 usr wm 34 68.36GB 143358320 1 unassigned wm 0 0 0 2 unassigned wm 0 0 0 3 unassigned wm 0 0 0 4 unassigned wm 0 0 0 5 unassigned wm 0 0 0 6 unassigned wm 0 0 0 7 unassigned wm 0 0 0 8 reserved wm 143358321 8.00MB 143374704

    Notice there is a slice 8 and slice 2 is NOT labeled “backup.” This is an EFI label and would need to be changed. use the following steps to change the label from an EFI label to an SMI label:

  • As root, use the format -e command and select the disk to label as follows:

    # format –e<cr>

    The system displays a list of disks. In the example, I selected disk 1 (c2t1d0):

    Searching for disks ... done AVAILABLE DISK SELECTIONS: 0. c2t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@780/pci@0/pci@9/scsi@0/sd@0,0 1. c2t1d0 <SEAGATE-ST973402SSUN72G-0603-68.37GB> /pci@780/pci@0/pci@9/scsi@0/sd@1,0 Specify disk (enter its number): 1<cr> selecting c2t1d0 [disk formatted]
  • The main menu is displayed. nature “label” to label the disk:

    FORMAT MENU: disk - select a disk nature - select (define) a disk type partition - select (define) a partition table current - characterize the current disk format - format and resolve the disk repair - repair a defective sector label - write label to the disk resolve - surface analysis defect - defect list management backup - search for backup labels verify - read and panoply labels research - note disk ID scsi - independent SCSI mode selects cache - enable, disable or query SCSI disk cache volname - set 8-character volume name !<cmd> - execute <cmd>, then return quit format> label<cr>
  • Select option 1 to label the disk with an SMI label and press Enter when prompted for autoconfiguration:

    [0] SMI Label [1] EFI Label Specify Label type[1]: 0<cr> Auto configuration via format.dat[no]?<cr> Auto configuration via generic SCSI-2[no]?<cr> format>
  • Exit the format utility.

    format> quit<cr>
  • To slice the disk so that it can be used as a ZFS boot disk, follow these steps:

  • As root, enter the format utility:

    # format<cr> Searching for disks ... done

    Select the disk that is going to be sliced. In the example, I will select disk 1 (c2t1d0):

    AVAILABLE DISK SELECTIONS: 0. c2t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@780/pci@0/pci@9/scsi@0/sd@0,0 1. c2t1d0 <SEAGATE-ST973402SSUN72G-0603-68.37GB> /pci@780/pci@0/pci@9/scsi@0/sd@1,0 Specify disk (enter its number): 1<cr>

    The system responds with

    selecting c2t1d0 [disk formatted]
  • Type “partition” at the format prompt. The partition menu is displayed.

    format> partition<cr> PARTITION MENU: 0 - change '0' partition 1 - change '1' partition 2 - change '2' partition 3 - change '3' partition 4 - change '4' partition 5 - change '5' partition 6 - change '6' partition 7 - change '7' partition select - select a predefined table modify - modify a predefined partition table cognomen - cognomen the current table print - panoply the current table label - write partition map and label to the disk !<cmd> - execute <cmd>, then return quit
  • Type “print” to panoply the current partition map.

    partition> print<cr>

    The system responds with the following:

    partition> print<cr> Current partition table (original): Total disk cylinders available: 14087 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 0 - 25 129.19MB (26/0/0) 264576 1 swap wu 26 - 51 129.19MB (26/0/0) 264576 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 52 - 14086 68.10GB (14035/0/0) 142820160 7 unassigned wm 0 0 (0/0/0) 0 partition>
  • Enter “modify” to change the partition table:

    partition> modify<cr>
  • Select option 1 for “All Free Hog” when prompted:

    Select partitioning base: 0. Current partition table (original) 1. utter Free Hog Choose basis (enter number) [0]? 1<cr> Part Tag Flag Cylinders Size Blocks 0 root wm 0 0 (0/0/0) 0 1 swap wu 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0
  • Type “yes” when asked whether to continue:

    Do you wish to continue creating a unusual partition table based on above table[yes]? yes<cr>

    Type “0” for the Free Hog partition:

    Free Hog partition[6]? 0<cr>
  • The system will prompt you to enter a size for each partition. Press Enter when prompted as follows, and each slice will be 0MB:

    Enter size of partition '1' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '3' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '4' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '5' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '6' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '7' [0b, 0c, 0.00mb, 0.00gb]:<cr>

    Because utter of the slices own been set to “0,” the free hog space is the entire disk. This space will be allocated to slice 0 as specified in step 6.

  • When prompted to gain this the current partition table, press Enter to use the default value “yes”:

    Okay to gain this the current partition table[yes]?<cr>
  • When prompted for a table name, enter “rootdisk.” This cognomen is not significant and can be any name.

    Enter table cognomen (remember quotes): rootdisk<cr>

    Enter “pr” to panoply the unusual partition table:

    partition> pr<cr> Current partition table (unnamed): Total disk cylinders available: 14087 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 0 - 14086 68.35GB (14087/0/0) 143349312 1 swap wu 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 partition>

    Notice that slice 0 is the entire disk.

  • Enter “quit” or press Ctrl+D to exit the format utility.

    partition> quit<cr>
  • Using the format Utility to Create Slices: x86

    As described earlier in this chapter, Oracle Solaris on the x86 platform treats disk drives slightly differently than on the SPARC-based systems. Disks on the x86 platform must own an fdisk partition table. The x86-based systems use the fdisk partition table to identify parts of the disk reserved for different OSs and to identify the partition that the system will boot from. This boot partition is referred to as the “active disk” partition. You can allocate one fdisk partition on a disk to be used for Oracle Solaris.

    On an x86-based system, once a disk drive has been physically installed and verified as working, you’ll use the format command to slice the disk, but first an fdisk partition must be created on the unusual drive. You can create this fdisk partition using the fdisk command from the command line or through the format utility. The following steps characterize how to create a fixed disk partition table on a disk using the format utility:

  • As root, nature “format” to salvage into the format utility.

    # format<cr>

    The following menu appears:

    AVAILABLE DISK SELECTIONS: 0. c1t0d0 <FUJITSU-M1606S-512-6234 cyl 3455 alt 2 hd 6 sec 102> /pci@0,0/pci9004,8178@3/cmdk@0,0 1. c1t1d0 <IBM-DFHSS1W!e-4141 cyl 4071 alt 2 hd 4 sec 135> /pci@0,0/pci9004,8178@3/cmdk@1,0 2. c1t2d0 <DEFAULT cyl 2928 alt 2 hd 6 sec 120> /pci@0,0/pci9004,8178@3/cmdk@2,0 Specify disk (enter its number):
  • Enter the number corresponding to the unusual drive and the following menu will be displayed:

    FORMAT MENU: disk - select a disk nature - select (define) a disk type partition - select (define) a partition table current - characterize the current disk format - format and resolve the disk fdisk - Run the fdisk program repair - repair a defective sector label - write label to the disk resolve - surface analysis defect - defect list management backup - search for backup labels verify - read and panoply labels save - save unusual disk/partition definitions research - note vendor, product and revision volname - set 8-character volume name5 quit format>
  • Select the fdisk option and the following menu appears:

    The recommended default partitioning for your disk is: a 100% "SOLARIS System" partition. To select this, gladden nature "y". To partition your disk differently, nature "n" and the "fdisk" program will let you select other partitions.
  • If you wish to use the entire drive for Oracle Solaris, enter “Y.” This will recrudesce you to the format menu. If “N” is entered, the fdisk menu will be displayed.

    Total disk size is 4073 cylinders Cylinder size is 540 (512 byte) blocks Cylinders Partition Status nature Start cessation Length ========= ====== ======== ===== === ====== === THERE ARE NO PARTITIONS CURRENTLY DEFINED SELECT ONE OF THE FOLLOWING: 1. Create a partition 2. Change dynamic (Boot from) partition 3. Delete a partition 4. Exit (Update disk configuration and exit) 5. Cancel (Exit without updating disk configuration) Enter Selection:
  • Choose 1 to create an fdisk partition. This is not the very as a slice.
  • After creating the partition, pick 4 to exit and save. The format menu will return.
  • Choose partition and follow the procedure for formatting a disk on page 272, nascence at step 4.
  • Disks on x86-based systems can be divided into 10 slices labeled slice 0 through slice 9. On Oracle Solaris 11/11, slices 0 through 7 are used for the very purposes as disk slices create on SPARC-based systems. Slice 2 represents utter of the space within the fdisk partition. As stated earlier, slices 8 and 9 are used for purposes specific to x86-based hardware. You cannot modify slices 8 and 9 using the format utility. nascence with Oracle Solaris 11.1, the boot disk on an x86-based system can accommodate an EFI label, and the partition scheme is slightly different than the SPARC system. Slice 0 is reserved for the BIOS_boot information. I’ll characterize this more in the next chapter.

    Here’s an instance of the partition table on an IDE or SATA disk on an x86-based system running Oracle Solaris 11/11, as displayed by the format utility:

    Part Tag Flag Cylinders Size Blocks (output omitted) 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 alternates wm 1 - 2 15.69MB (2/0/0) 32130

    In the previous example, notice that slice 9 is defined and tagged as the alternates slice.

    The next instance shows the partition table for a SCSI disk attached to an x86-based system. Notice that partition 8 is assigned, but slice 9 is not used:

    Part Tag Flag Cylinders Size Blocks (output omitted) 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 unassigned wm 0 0 (0/0/0) 0

    One more item of note: On criterion UFSs, don’t change the size of disk slices that are currently in use. When a disk with existing slices is repartitioned and relabeled, any existing data will be lost. Before repartitioning a disk, first copy utter of the data to tape or to another disk.

    You can besides create the fixed disk partition table on an x86-based system disk from the command line using a single command as follows:

    # fdisk –B c1t0d0<cr>

    The –B option creates a single fixed disk partition that spans the entire disk. The following 36GB disk was formatted using the fdisk –B command:

    Part Tag Flag Cylinders Size Blocks 0 unassigned wm 0 0 (0/0/0) 0 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 4695 35.97GB (4696/0/0) 75441240 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 unassigned wm 0 0 (0/0/0) 0

    The fdisk –B command can besides be used to metamorphose a disk label from an EFI to SMI.

    To verify that a disk contains a fixed disk partition table, issue the following command:

    # fdisk -v -W - /dev/rdsk/c3t0d0p<cr>

    The system displays the fdisk table for disk c3t0d0:

    * /dev/rdsk/c3t0d0p0 default fdisk table * Dimensions: * 512 bytes/sector * 63 sectors/track * 255 tracks/cylinder * 2088 cylinders * * systid: * 1: DOSOS12 * 2: PCIXOS * 4: DOSOS16 * 5: EXTDOS * 6: DOSBIG * 7: FDISK_IFS * 8: FDISK_AIXBOOT * 9: FDISK_AIXDATA * 10: FDISK_0S2BOOT * 11: FDISK_WINDOWS * 12: FDISK_EXT_WIN * 14: FDISK_FAT95 * 15: FDISK_EXTLBA * 18: DIAGPART * 65: FDISK_LINUX * 82: FDISK_CPM * 86: DOSDATA * 98: OTHEROS * 99: UNIXOS * 100: FDISK_NOVELL2 * 101: FDISK_NOVELL3 * 119: FDISK_QNX4 * 120: FDISK_QNX42 * 121: FDISK_QNX43 * 130: SUNIXOS * 131: FDISK_LINUXNAT * 134: FDISK_NTFSVOL1 * 135: FDISK_NTFSVOL2 * 165: FDISK_BSD * 167: FDISK_NEXTSTEP * 183: FDISK_BSDIFS * 184: FDISK_BSDISWAP * 190: X86BOOT * 191: SUNIXOS2 * 238: EFI_PMBR * 239: EFI_FS * Id Act Bhead Bsect Bcyl Ehead Esect Ecyl Rsect Numsect 191 128 0 1 1 254 63 1023 16065 33527655 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

    When there are multiple disks of the very nature (manufacturer, model, size, and geometry) to be sliced, you can save time by copying the label from a source disk over to a target disk without going through utter of the steps using the format utility. use the prtvtoc command to salvage the partition table from the source disk (c0t0d0) and write the table to the target disk (c0t1d0) using the fmthard command as follows:

    # prtvtoc /dev/rdsk/c0t0d0s2 | fmthard –s - /dev/rdsk/c0t1d0s2<cr>

    Richard Gardner, who helped mold U.S. curious policy as professor and ambassador, dies at 91 | true questions and Pass4sure dumps

    Richard N. Gardner, who helped mold U.S. curious policy and generations of policymakers as a Columbia Law School professor for nearly six decades and as a U.S. ambassador to Italy and Spain, died Feb. 16 at his home in unusual York City. He was 91.

    The intuition was congestive heart failure, said his daughter, Nina Gardner.

    Gardner spent more than half a century touching between academia and government, training the legal and economic expertise that he gained as a Yale law student and Rhodes scholar on some of the most pressing global concerns of the cold War and its aftermath.

    At Columbia, he was best known for his seminar "Legal Aspects of U.S. curious Economic Policy," which he taught from 1955 until his retirement in 2012. Enrollment was famously competitive, and Gardner invited those admitted to complete notecards with their contact information and career aspirations.

    He called upon those notecards years later to recommend his former students for influential posts in government and beyond, pile what the Chronicle of Higher Education once described as "a global network of lawyers, diplomats, business leaders and policy makers."

    Gardner held a progression of his own influential government posts nascence in the 1960s, when he served under Presidents John F. Kennedy and Lyndon B. Johnson as deputy aide secretary of condition for international organization affairs. He later served as ambassador to Italy from 1977 to 1981, under President Jimmy Carter, and as ambassador to Spain from 1993 to 1997, under President Bill Clinton.

    He was a forceful proponent of international institutions including the United Nations and their role in addressing such problems as environmental degradation - an belt where he was credited with sounding a prescient alarm.

    "We are finally nascence to recognize that how a nation deals with its national environment is no longer its own and nobody else's business," he wrote in a unusual York Times commentary in 1970. "We are nascence to comprehend the union of the world's ecological system, which means that utter nations may be affected by how any one of them treats its air, water and land."

    He faced perhaps his most challenging government assignment as ambassador to Italy, at a time when the Communist Party seemed ascendant and when the country was in the throes of the violence sponsored by the leftist Red Brigades.

    In the past, the United States had sought to influence Italian elections through CIA activity, according to journalist Tim Weiner's bespeak "Legacy of Ashes: The History of the CIA." Gardner said that as ambassador he vowed to veneration Carter's inaugural vow that "we will not behave in curious places so as to violate their rules and standards here at home."

    "I took that very seriously," Gardner recalled in remarks before the Council on curious Relations in 2005. "I said, they are going to combat the communists, but using public diplomacy. . . . There are going to be no dirty tricks."

    He invited to the U.S. Embassy Italian cultural figures including filmmaker Federico Fellini and writers Leonardo Sciascia and Alberto Moravia, who he said had been previously omitted from official guest lists because of their leftists politics. The Times described him as the "first American ambassador to Italy to gain formal approaches to the Communist Party."

    Writing in the Times in 1983, he recalled engaging in "much table pounding in Washington" to obtain funds to train Italian teachers of English and English-speaking teachers of Italian.

    He besides sought to enlarge the number of American texts available to Italian readers, noting ruefully that when he requested an Italian translation of the Federalist Papers, he scholarly they had been out of print in Italian for years. The works of Marx , Lenin and Stalin, however, were widely available.

    He was credited with helping prevail Italy to become the first European country to accept U.S. cruise missiles on its land, an vital achievement at the time. But "we appear to own forgotten the obvious verity that you don't defend national security with arms alone," he wrote in the Times commentary. "The Soviet SS-20 missile is a threat to European security, but just as mighty a threat is the leisurely and equable erosion of common values and interests that is the foundation of the Atlantic alliance."

    Richard Newton Gardner was born in unusual York City on July 9, 1927. His father was a lawyer, and his mother was a homemaker.

    After stateside Army service during World War II, Gardner received a bachelor's degree in economics from Harvard University in 1948. He was a 1951 graduate of Yale Law School and received a PhD in economics from the University of Oxford in 1954.

    His books included "Sterling-Dollar Diplomacy: The Origins and the Prospects of Their International Economic Order" (1956), "In Pursuit of World Order: U.S. curious Policy and International Organizations" (1964), and a memoir, "Mission Italy: On the Front Lines of the cold War" (2005).

    Gardner advised two Democratic presidential candidates, Clinton in 1992 and Al Gore in 1998, on curious policy during their White House campaigns. As ambassador to Spain during the Clinton administration, he sought to defend intellectual property rights for U.S. software makers and to boost sales of U.S. helicopters.

    His wife of 51 years, the former Danielle Luzzatto, died in 2008. Survivors comprise two children, Nina Gardner of Washington and Anthony Gardner, who served under President Barack Obama as U.S. ambassador to the European Union, of London; and three grandchildren.

    His wife, whose family, dote Gardner's, was of Jewish heritage, was born in Italy and fled to the United States after the promulgation of the 1938 anti-Semitic racial laws under fascist dictator Benito Mussolini.

    Gardner credited her as a co-ambassador, especially during their time in Italy. She once came home from the hairdresser and reported that she had heard from the mistress of "Minister X" that the minister was going to resign - "and it was an vital minister," Gardner joked before the Council on curious Relations.

    He informed his colleagues in the CIA, who did not believe the report, until the minister stepped down that Friday. The following Monday, his colleagues demanded to know where he had gotten his tip. "I took mighty joy," he recalled, "in aphorism to the CIA, 'I never disclose sources.' "

    New York’s public housing system is the size of a city. It’s failing children. | true questions and Pass4sure dumps

    By Emily A. Benfer

    February 11

    Emily A. Benfer is the director of the Health Justice Advocacy Clinic and a professor at Columbia Law School.

    The unusual York City Housing Authority, amenable for 176,000 apartments in 2,418 buildings, is by far the biggest public-housing system in the country. Beset by lead-paint hazards, mold, heating failures and habitual mismanagement, NYCHA buildings are besides a danger to the authority’s 400,000 residents — the population of a mid-size American city.

    On Jan. 31, unusual York narrowly avoided a complete federal takeover of NYCHA by agreeing to disburse $2.2 billion on a decade-long effort to repair NYCHA’s decrepit buildings and by ceding much management responsibility to a powerful federal monitor. Housing and Urban evolution Secretary Ben Carson and Mayor Bill de Blasio (D) announced the agreement at HUD’s Lower Manhattan offices on the deadline date set by a federal judge who terminal drop had rejected an earlier agreement as inadequate.

    The unusual agreement is besides inadequate. That was made limpid Monday with news that interim NYCHA chairman Stanley Brezenoff refused to token the agreement. The deal unfairly places “all of the pecuniary burden” on the city and not on the federal government, where it belongs, he told the unusual York Times. The city had announced terminal week that he was being replaced.

    Last summer, NYCHA estimated that $32 billion would be needed over five years to fix its buildings, which are on middling more than 60 years old, according to the unusual York Times. The city could never afford to disburse that much on these essential repairs. Federal funding will be required if the public-health juncture is going to be effectively addressed and HUD is going to fulfill its duty to provide safe and decent housing. HUD provides $2 billion of NYCHA’s $3.2 billion annual operating budget.

    The conditions of public housing in unusual York City are deplorable. More than 59 percent of NYCHA residents surveyed reported mold in their units, and 52 percent reported leaking roofs, windows or plumbing. More than 800 children under age 6 and animate in NYCHA housing tested positive for tall levels of lead between 2012 and 2016. The housing authority had ignored lead-paint safety regulations for years.

    The alarming deterioration of unusual York’s public housing occurred in tandem with equable federal funding cuts to public housing nationwide, reductions that picked up hasten under the Trump administration. According to the Wall Street Journal, the administration made an initial cleave of at least $35 million for 2017 as fraction of an expected $150 million total.

    When billions are needed but millions are being cut, the authorization of a federal monitor is the equivalent of nailing a 2-by-4 to a collapsing building.

    NYCHA’s neglect has had staggering consequences for children’s health. Lead poisoning can result in reduced IQ, developmental delays, academic failure, juvenile delinquency, behavioral problems, biological and neurological damage and premature death. The Centers for Disease Control and Prevention makes it clear: “There is no known safe smooth of lead.” A unusual York condition report terminal year create that 80 percent of NYCHA buildings, where mold is rife, had conditions that could contribute to asthma in children. As the CDC notes, asthma is a leading intuition of school absences and reduced daily activities; in 2008 alone, asthma caused 14.2 million missed days of travail and 10.5 million missed days of school nationwide, affecting children from low-income families at the highest rates.

    Yet NYCHA does not own the funds necessary to address the more than 245,000 open travail orders for repairs, let lonesome employ enough lead-hazard risk investigators or mold remediation specialists to address these problems.

    Shockingly, the unusual NYCHA agreement with HUD provides no supplemental federal funding for mold and lead-hazard inspection and remediation. Instead, the agreement mandates the use of “visual assessments” for lead hazards. As The Post reported in a tragic 2017 tale about lead hazards in D.C. public housing, one of the “key weaknesses of federal guidelines” mandated by HUD and followed by the District is that inspectors depend on visual inspections for peeling paint and deteriorating conditions “instead of specifically testing for lead or asthma-inducing mold.” In effect, children in federally assisted housing must develop lead poisoning before meaningful inspections occur.

    HUD’s want of oversight, compliance review and long-term planning is a problem that reaches far beyond NYCHA. June 2018 reports from HUD’s Inspector universal and the Government Accountability Office on the conditions of federally assisted housing create wide margins for fraudulent reporting. For example, the East Chicago Housing Authority in Indiana was allowed to falsely self-certify compliance as generations of families were exposed to lead and arsenic while residing in public housing on a Superfund site.

    HUD’s perfunctory approach to its responsibilities, combined with inadequate federal funding, has resulted in squalid environments that menace the health and livelihoods of public-housing residents. By disinvesting in housing for low-income families, Congress and HUD are thwarting progress, perpetuating racial segregation and increasing the cycle of poverty for future generations. The federal government has an obligation to protect those who qualify for federal assistance. If generations of children are going to thrive, they first must live in homes and communities that government neglect and indifference haven’t made Dangerous to their health.

    Direct Download of over 5500 Certification Exams

    3COM [8 Certification Exam(s) ]
    AccessData [1 Certification Exam(s) ]
    ACFE [1 Certification Exam(s) ]
    ACI [3 Certification Exam(s) ]
    Acme-Packet [1 Certification Exam(s) ]
    ACSM [4 Certification Exam(s) ]
    ACT [1 Certification Exam(s) ]
    Admission-Tests [13 Certification Exam(s) ]
    ADOBE [93 Certification Exam(s) ]
    AFP [1 Certification Exam(s) ]
    AICPA [2 Certification Exam(s) ]
    AIIM [1 Certification Exam(s) ]
    Alcatel-Lucent [13 Certification Exam(s) ]
    Alfresco [1 Certification Exam(s) ]
    Altiris [3 Certification Exam(s) ]
    Amazon [2 Certification Exam(s) ]
    American-College [2 Certification Exam(s) ]
    Android [4 Certification Exam(s) ]
    APA [1 Certification Exam(s) ]
    APC [2 Certification Exam(s) ]
    APICS [2 Certification Exam(s) ]
    Apple [69 Certification Exam(s) ]
    AppSense [1 Certification Exam(s) ]
    APTUSC [1 Certification Exam(s) ]
    Arizona-Education [1 Certification Exam(s) ]
    ARM [1 Certification Exam(s) ]
    Aruba [6 Certification Exam(s) ]
    ASIS [2 Certification Exam(s) ]
    ASQ [3 Certification Exam(s) ]
    ASTQB [8 Certification Exam(s) ]
    Autodesk [2 Certification Exam(s) ]
    Avaya [96 Certification Exam(s) ]
    AXELOS [1 Certification Exam(s) ]
    Axis [1 Certification Exam(s) ]
    Banking [1 Certification Exam(s) ]
    BEA [5 Certification Exam(s) ]
    BICSI [2 Certification Exam(s) ]
    BlackBerry [17 Certification Exam(s) ]
    BlueCoat [2 Certification Exam(s) ]
    Brocade [4 Certification Exam(s) ]
    Business-Objects [11 Certification Exam(s) ]
    Business-Tests [4 Certification Exam(s) ]
    CA-Technologies [21 Certification Exam(s) ]
    Certification-Board [10 Certification Exam(s) ]
    Certiport [3 Certification Exam(s) ]
    CheckPoint [41 Certification Exam(s) ]
    CIDQ [1 Certification Exam(s) ]
    CIPS [4 Certification Exam(s) ]
    Cisco [318 Certification Exam(s) ]
    Citrix [48 Certification Exam(s) ]
    CIW [18 Certification Exam(s) ]
    Cloudera [10 Certification Exam(s) ]
    Cognos [19 Certification Exam(s) ]
    College-Board [2 Certification Exam(s) ]
    CompTIA [76 Certification Exam(s) ]
    ComputerAssociates [6 Certification Exam(s) ]
    Consultant [2 Certification Exam(s) ]
    Counselor [4 Certification Exam(s) ]
    CPP-Institue [2 Certification Exam(s) ]
    CPP-Institute [1 Certification Exam(s) ]
    CSP [1 Certification Exam(s) ]
    CWNA [1 Certification Exam(s) ]
    CWNP [13 Certification Exam(s) ]
    Dassault [2 Certification Exam(s) ]
    DELL [9 Certification Exam(s) ]
    DMI [1 Certification Exam(s) ]
    DRI [1 Certification Exam(s) ]
    ECCouncil [21 Certification Exam(s) ]
    ECDL [1 Certification Exam(s) ]
    EMC [129 Certification Exam(s) ]
    Enterasys [13 Certification Exam(s) ]
    Ericsson [5 Certification Exam(s) ]
    ESPA [1 Certification Exam(s) ]
    Esri [2 Certification Exam(s) ]
    ExamExpress [15 Certification Exam(s) ]
    Exin [40 Certification Exam(s) ]
    ExtremeNetworks [3 Certification Exam(s) ]
    F5-Networks [20 Certification Exam(s) ]
    FCTC [2 Certification Exam(s) ]
    Filemaker [9 Certification Exam(s) ]
    Financial [36 Certification Exam(s) ]
    Food [4 Certification Exam(s) ]
    Fortinet [13 Certification Exam(s) ]
    Foundry [6 Certification Exam(s) ]
    FSMTB [1 Certification Exam(s) ]
    Fujitsu [2 Certification Exam(s) ]
    GAQM [9 Certification Exam(s) ]
    Genesys [4 Certification Exam(s) ]
    GIAC [15 Certification Exam(s) ]
    Google [4 Certification Exam(s) ]
    GuidanceSoftware [2 Certification Exam(s) ]
    H3C [1 Certification Exam(s) ]
    HDI [9 Certification Exam(s) ]
    Healthcare [3 Certification Exam(s) ]
    HIPAA [2 Certification Exam(s) ]
    Hitachi [30 Certification Exam(s) ]
    Hortonworks [4 Certification Exam(s) ]
    Hospitality [2 Certification Exam(s) ]
    HP [750 Certification Exam(s) ]
    HR [4 Certification Exam(s) ]
    HRCI [1 Certification Exam(s) ]
    Huawei [21 Certification Exam(s) ]
    Hyperion [10 Certification Exam(s) ]
    IAAP [1 Certification Exam(s) ]
    IAHCSMM [1 Certification Exam(s) ]
    IBM [1532 Certification Exam(s) ]
    IBQH [1 Certification Exam(s) ]
    ICAI [1 Certification Exam(s) ]
    ICDL [6 Certification Exam(s) ]
    IEEE [1 Certification Exam(s) ]
    IELTS [1 Certification Exam(s) ]
    IFPUG [1 Certification Exam(s) ]
    IIA [3 Certification Exam(s) ]
    IIBA [2 Certification Exam(s) ]
    IISFA [1 Certification Exam(s) ]
    Intel [2 Certification Exam(s) ]
    IQN [1 Certification Exam(s) ]
    IRS [1 Certification Exam(s) ]
    ISA [1 Certification Exam(s) ]
    ISACA [4 Certification Exam(s) ]
    ISC2 [6 Certification Exam(s) ]
    ISEB [24 Certification Exam(s) ]
    Isilon [4 Certification Exam(s) ]
    ISM [6 Certification Exam(s) ]
    iSQI [7 Certification Exam(s) ]
    ITEC [1 Certification Exam(s) ]
    Juniper [64 Certification Exam(s) ]
    LEED [1 Certification Exam(s) ]
    Legato [5 Certification Exam(s) ]
    Liferay [1 Certification Exam(s) ]
    Logical-Operations [1 Certification Exam(s) ]
    Lotus [66 Certification Exam(s) ]
    LPI [24 Certification Exam(s) ]
    LSI [3 Certification Exam(s) ]
    Magento [3 Certification Exam(s) ]
    Maintenance [2 Certification Exam(s) ]
    McAfee [8 Certification Exam(s) ]
    McData [3 Certification Exam(s) ]
    Medical [69 Certification Exam(s) ]
    Microsoft [374 Certification Exam(s) ]
    Mile2 [3 Certification Exam(s) ]
    Military [1 Certification Exam(s) ]
    Misc [1 Certification Exam(s) ]
    Motorola [7 Certification Exam(s) ]
    mySQL [4 Certification Exam(s) ]
    NBSTSA [1 Certification Exam(s) ]
    NCEES [2 Certification Exam(s) ]
    NCIDQ [1 Certification Exam(s) ]
    NCLEX [2 Certification Exam(s) ]
    Network-General [12 Certification Exam(s) ]
    NetworkAppliance [39 Certification Exam(s) ]
    NI [1 Certification Exam(s) ]
    NIELIT [1 Certification Exam(s) ]
    Nokia [6 Certification Exam(s) ]
    Nortel [130 Certification Exam(s) ]
    Novell [37 Certification Exam(s) ]
    OMG [10 Certification Exam(s) ]
    Oracle [279 Certification Exam(s) ]
    P&C [2 Certification Exam(s) ]
    Palo-Alto [4 Certification Exam(s) ]
    PARCC [1 Certification Exam(s) ]
    PayPal [1 Certification Exam(s) ]
    Pegasystems [12 Certification Exam(s) ]
    PEOPLECERT [4 Certification Exam(s) ]
    PMI [15 Certification Exam(s) ]
    Polycom [2 Certification Exam(s) ]
    PostgreSQL-CE [1 Certification Exam(s) ]
    Prince2 [6 Certification Exam(s) ]
    PRMIA [1 Certification Exam(s) ]
    PsychCorp [1 Certification Exam(s) ]
    PTCB [2 Certification Exam(s) ]
    QAI [1 Certification Exam(s) ]
    QlikView [1 Certification Exam(s) ]
    Quality-Assurance [7 Certification Exam(s) ]
    RACC [1 Certification Exam(s) ]
    Real-Estate [1 Certification Exam(s) ]
    RedHat [8 Certification Exam(s) ]
    RES [5 Certification Exam(s) ]
    Riverbed [8 Certification Exam(s) ]
    RSA [15 Certification Exam(s) ]
    Sair [8 Certification Exam(s) ]
    Salesforce [5 Certification Exam(s) ]
    SANS [1 Certification Exam(s) ]
    SAP [98 Certification Exam(s) ]
    SASInstitute [15 Certification Exam(s) ]
    SAT [1 Certification Exam(s) ]
    SCO [10 Certification Exam(s) ]
    SCP [6 Certification Exam(s) ]
    SDI [3 Certification Exam(s) ]
    See-Beyond [1 Certification Exam(s) ]
    Siemens [1 Certification Exam(s) ]
    Snia [7 Certification Exam(s) ]
    SOA [15 Certification Exam(s) ]
    Social-Work-Board [4 Certification Exam(s) ]
    SpringSource [1 Certification Exam(s) ]
    SUN [63 Certification Exam(s) ]
    SUSE [1 Certification Exam(s) ]
    Sybase [17 Certification Exam(s) ]
    Symantec [134 Certification Exam(s) ]
    Teacher-Certification [4 Certification Exam(s) ]
    The-Open-Group [8 Certification Exam(s) ]
    TIA [3 Certification Exam(s) ]
    Tibco [18 Certification Exam(s) ]
    Trainers [3 Certification Exam(s) ]
    Trend [1 Certification Exam(s) ]
    TruSecure [1 Certification Exam(s) ]
    USMLE [1 Certification Exam(s) ]
    VCE [6 Certification Exam(s) ]
    Veeam [2 Certification Exam(s) ]
    Veritas [33 Certification Exam(s) ]
    Vmware [58 Certification Exam(s) ]
    Wonderlic [2 Certification Exam(s) ]
    Worldatwork [2 Certification Exam(s) ]
    XML-Master [3 Certification Exam(s) ]
    Zend [6 Certification Exam(s) ]

    References :

    Dropmark :
    Dropmark-Text :
    Blogspot :
    Wordpress : :

    Back to Main Page

    Killexams 310-012 exams | Killexams 310-012 cert | Pass4Sure 310-012 questions | Pass4sure 310-012 | pass-guaratee 310-012 | best 310-012 test preparation | best 310-012 training guides | 310-012 examcollection | killexams | killexams 310-012 review | killexams 310-012 legit | kill 310-012 example | kill 310-012 example journalism | kill exams 310-012 reviews | kill exam ripoff report | review 310-012 | review 310-012 quizlet | review 310-012 login | review 310-012 archives | review 310-012 sheet | legitimate 310-012 | legit 310-012 | legitimacy 310-012 | legitimation 310-012 | legit 310-012 check | legitimate 310-012 program | legitimize 310-012 | legitimate 310-012 business | legitimate 310-012 definition | legit 310-012 site | legit online banking | legit 310-012 website | legitimacy 310-012 definition | >pass 4 sure | pass for sure | p4s | pass4sure certification | pass4sure exam | IT certification | IT Exam | 310-012 material provider | pass4sure login | pass4sure 310-012 exams | pass4sure 310-012 reviews | pass4sure aws | pass4sure 310-012 security | pass4sure cisco | pass4sure coupon | pass4sure 310-012 dumps | pass4sure cissp | pass4sure 310-012 braindumps | pass4sure 310-012 test | pass4sure 310-012 torrent | pass4sure 310-012 download | pass4surekey | pass4sure cap | pass4sure free | examsoft | examsoft login | exams | exams free | examsolutions | exams4pilots | examsoft download | exams questions | examslocal | exams practice | | Braindumps Download | |